Nidec’s Motor for Battery-assisted Bicycles is Adopted for Use in Taiyo Yuden’s Regenerative System that Keeps Them Running for 1,000km per Charge

发布时间：2024-04-23 11:47
作者：AMEYA360
来源：Nidec
阅读量：473

　　Nidec Corporation (TSE: 6594; OTC US: NJDCY) (“Nidec” or the “Company”) today announced that a motor that it developed for regenerative system-based battery-assisted bicycles has been adopted for use in FEREMO™, the regenerative power assistance system*1 that Taiyo Yuden Co., Ltd. (“Taiyo Yuden”) produced keeps a bicycle running for up to 1,000km on a single charge*2

Nidec’s Motor for Battery-assisted Bicycles is Adopted for Use in Taiyo Yuden’s Regenerative System that Keeps Them Running for 1,000km per Charge

　　FEREMO™, the regenerative power-assisted system that Taiyo Yuden developed, uses its power-assisting motor as a generator when the person on a bicycle puts on the brake or has his/her feet off the pedals, to collect and reuse motion energy.

　　This feature enables FEREMO™ to enjoy a significantly longer per-charge running distance, or up to 1,000km, than conventional power-assisting systems. In addition, with speed suppressed while the regenerative system is on, one can ride a bicycle safely even on a downhill.

　　Nidec’s power-assisted bicycle motor installed in FEREMO™ was designed exclusively for the system. While conventional power-assisting systems merely engage in powered operation (i.e., driving a motor with battery-generated electricity), this new motor operates as a generator when a bicycle decelerates, engaging in regeneration (i.e., rotating a motor with external power to generate electricity). In comparison with the Company’s other existing motors, this latest model boasts 30% more regenerative electric power, which is an industry-leading power generation efficiency, to help FEREMO™ achieve the 1,000km travelling distance. Furthermore, unlike assistance-only motors, load is constantly on the motor, making it more durable, low-noise, and radiation-efficient than conventional models.

　　As the world’s leading comprehensive motor manufacturer, Nidec stays committed to developing products with its technologies to make light, thin, short, and small products, as well as productivity enhancement and control technologies; and to proposing, at an overwhelming speed, revolutionary solutions that contribute to the lives of people around the world.

　　*1: FEREMO™  are Taiyo Yuden Co., Ltd.’s registered trademark or trademark for use in Japan

　　*2. According to Taiyo Yuden’s prototype vehicle measurement patterns (eco mode: 1,000km; middle mode: 200km; and high mode: 100km) based on the Japanese Industrial Standards

（备注：文章来源于网络，信息仅供参考，不代表本网站观点，如有侵权请联系删除！）

上一篇：ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement

下一篇：Nidec to Expand Its Production Capacity for Water-cooling Modules

在线留言询价

相关阅读
Nidec Machine Tool Launches Newly Developed, Compact & Powerful Universal Head - A Light, Thin, Short and Small Product Capable of Meeting Various Machining Needs
Trade news

Nidec Machine Tool Launches Newly Developed, Compact & Powerful Universal Head - A Light, Thin, Short and Small Product Capable of Meeting Various Machining Needs

　　- A Universal Head that is approximately 80% in size of conventional products but that still possesses industry-leading high-speed machining　　- A Universal Head contributes to automated machining system and saves manpower of cast heavy duty cutting to high-precision mold finishing　　Nidec Machine Tool Corporation (represented by Mr. Haruhiko Niitani, president, and headquartered in Ritto, Shiga Prefecture) (“Nidec Machine Tool” or the “Company”), a Nidec Group company, today announced the launch of a new universal head (UH), an attachment of the Company’s MVR series of double column type milling machine with five-face machining capability The UH boasted an industry-leading compactness, by making the size approximately 80%*1of the conventional products, while maintaining the spindle capability with high output and speed.　　This small UH enables a better accessibility between the tool-and the workpiece, as well as finished-surface quality and high-efficiency machining under ideal machining conditions, and its “light, thin, short, and small” features contribute greatly to mold and other products’ manufacturing processes. This UH’s sale is going to start at the Company’s “Large Machine Preview Show” to be held in Ritto, Shiga Prefecture, on Friday, February 02.　　While made compact to improve its tool-workpiece accessibility and motion range, this new UH has an inclined axis with an extended tool-holding projection, enabling a better accessibility with a workpiece and the use of short and small tools. Additionally, even in machining processes that require long tools, this UH’s stiffer main spindle makes possible a variety of machining, from rough to finish machining. Also, with the UH able to approach up to 220mm (8.6”) to the wall, thanks to an improved swing span and interference range, the interference area with a workpiece has become smaller, and it can perform the precision machining on small and thin works and deep corners.　　To secure better efficiency, this UH has a spindle speed of 20-6,000min-1, a spindle motor output of 15kW/420min-1, and a spindle maximum torque of 341N·m, while enjoying shorter non-machining time based on faster indexing time of each axis, shorter machining time due to stiffer attachments, and other features to improve productivity. Furthermore, the UH, which can perform indexing per angular 1 degree even during high output, has a high degree of freedom in machining, and can capable of handling a wide range of works, from cast heavy duty cutting to high-precision mold finish machining.　　This UH can be installed into the Company’s double column type milling machining with five-face machining capability, i.e., MVR·Ax and MVR·Hx. The machines already delivered to the customers are also capable to install the attachment with additional construction.　　Nidec Machine Tool Corporation stays committed to making proposals to contribute to addressing manufacturing automation, manpower saving, and other issues in the fields of machinery business and total solutions including attachments and peripheral devices.
2024-05-14 11:26 阅读量：247
Nidec Precision Develops TapSense, the World’s Thinnest Linear Resonant Actuator
Trade news

Nidec Precision Develops TapSense, the World’s Thinnest Linear Resonant Actuator

　　Nidec Precision Corporation (“Nidec Precision” or the “Company”), a member of Nidec Corporation’s group companies, announced today that it has developed TapSense, the world’s thinnest linear resonant actuator*.　　Nidec Precision’s TapSense　　Nidec Precision developed TapSense, the world’s thinnest* 1.4mm-thick linear resonant actuator by utilizing its precision manufacturing technology that the Company has, since its foundation, nurtured in the camera industry – and by designing from scratch a magnetic circuit optimum for a thin actuator. TapSense realizes tablet and notebook PCs and other digital terminals that are thinner than their conventional models.　　With its excellent responsiveness and vibration force, TapSense can reproduce a crisp click feeling, while recreating a variety of tactile feedback, including the feeling of dial control. Additionally, its high responsiveness makes TapSense easier to control than conventional linear resonant actuators.　　The cumulative shipments of the Nidec Group’s vibration motors exceeded 1.5 billion units at the end of March 2024, and these motors produced by Nidec’s technologies which enable light, thin, short, and small form factors with high efficiency and ease of control are highly valued by our customers.　　As a member of the world’s leading comprehensive motor manufacturer, Nidec Precision stays committed to proposing revolutionary solutions that contribute to realizing a comfortable society.　　*Data, from Nidec Precision’s research, as of May 01, 2024
2024-05-10 13:11 阅读量：285
Nidec to Expand Its Production Capacity for Water-cooling Modules
Trade news

Nidec to Expand Its Production Capacity for Water-cooling Modules

　　Nidec Corporation (TSE: 6594; OTC US: NJDCY) (“Nidec” or the “Company”) today announced that it will enhance its CDU (Coolant Distribution Unit) production line in Thailand, the Company’s manufacturing base for water-cooling modules for servers, to increase the factory’s monthly CDU production capacity from 200 to 2,000 units by June 2024.　　Nidec’s water-cooling module　　The CDU production capacity expansion is in response to the adoption by Supermicro, an American AI server manufacturer. The jointly developed with Supermicro 100 to 250 kW products will be manufactured at the Ayutthaya Plant in Thailand, where the existing line has been expanded.　　So far, the fan-based air-cooling method has mainly been employed for computing servers in data centers, research institutes, and other similar facilities. However, in AI, the market expected to grow going forward, semiconductor-based arithmetic units (CPUs and GPUs) that utilize AI to process learning information with big data generate significantly more heat than their predecessors. Thus, as the air-cooling method, which relies on air-conditioning equipment, is insufficient to cool a myriad of servers lined up in a building. This is why the water-cooling system, whose cooling capability is far superior to the air-cooling system’s, is expected to become indispensable in the future.　　As the water-cooling module market is forecast to continue its growth, Nidec intends to expand its monthly CDU production capacity to more than 3,000 units in the future, while expecting the size of related products’ markets to be 10 billion yen in FY2023, and more than 80 billion yen in FY2024.　　Nidec’s cooling systems employ a liquid-to-liquid method, where cooling modules installed in each server supply cooling water via metal pipes to directly cool each server’s computing devices. The systems comprise a CDU (coolant distribution unit), a cooling water distributor; a CDM (coolant distribution manifold), a cooling water piping; and an LCM (liquid cooling module), a water-cooling module.　　The aforementioned product features the redundancy of its pumps, electricity sources, circuit substrates, and other important units, which are all in pairs to improve the system’s reliability. Additionally, those units are replaceable even during maintenance, without stopping its cooling system, to keep the server operating (a hot-swap functionality).　　To contribute to the development of the world’s AI, Nidec stays committed to working as a comprehensive thermal solution manufacturer to provide products that perfectly reflect people’s needs. By offering proposals a step ahead of the competition, and with an enhanced lineup of its high-reliability products, Nidec presses ahead to become a market leader.
2024-04-22 14:27 阅读量：491
Nidec Drive Technology Adds New Super-high-precision Reducers to Its ABLE Series
Trade news

Nidec Drive Technology Adds New Super-high-precision Reducers to Its ABLE Series

　　Nidec Drive Technology (“Nidec Drive Technology” or the “Company”), a member of Nidec Corporation’s group companies, announced today that it has added high-end models that boast industry-leading low backlash, noise, and vibration, to the Company’s lineup of the ABLE series, a group of servo motor-dedicated planetary reducers currently on sale.　　A VRS Series Reducer A VRT Series Reducer　　Nidec Drive Technology’s Latest High-precision ABLE Series Reducers　　“ABLE reducer” is the trade name of the group of servo motor reducers that Nidec Drive Technology sells. The latest models that the Company has newly developed adopt tooth-surface grinding gears*1, successfully achieving industry-leading precision, noise, and vibration levels (backlash: 1min., or 1/3 of existing models*2; noise level: 5dB*3; and vibration level: 30% less than existing models*3).　　High-end laser beam machines, machine tools, woodworking machinery, and other mechanical products require highly accurate positioning, and a reducer’s backlash, vibration, etc. directly affect such products’ precision. Nidec Drive Technology’s latest products, whose tooth surfaces were ground with the newest models of Nidec Machine Tool Corporation’s globally renowned gear grinders, have achieved the aforementioned performance levels while driving down cost.　　Nidec Drive Technology stays committed to providing various business fields with high-efficiency industrial machines that utilize the Company’s continuously variable transmission-based knowhow, to contribute to productivity improvement and automation.　　*1. Tooth-surface grinding: A method to grind gear’s tooth surface with a grinding stone. Other grinding methods include gear cutting, shaving, and skiving, but the tooth-surface grinding method can secure better precision than them.　　*2. Backlash: The gap created when meshing gears are interlocked with each other.　　*3. Representative values of Model No. VRS-140, with a reduction ratio of 1/4
2024-04-18 13:45 阅读量：385
热门分类
盒子，外壳，机架 电缆，电线 电路保护 连接器，互连器件 开发套件 机电产品 嵌入式解决方案 风扇，热管理 光电元件 其它 无源元件 电源 半导体 传感器，变送器 测试与测量
  • 一周热料
  • 紧缺物料秒杀
型号 品牌 询价
MC33074DR2G onsemi
CDZVT2R20B ROHM Semiconductor
BD71847AMWV-E2 ROHM Semiconductor
RB751G-40T2R ROHM Semiconductor
TL431ACLPR Texas Instruments
型号 品牌 抢购
BP3621 ROHM Semiconductor
ESR03EZPJ151 ROHM Semiconductor
TPS63050YFFR Texas Instruments
IPZ40N04S5L4R8ATMA1 Infineon Technologies
STM32F429IGT6 STMicroelectronics
BU33JA2MNVX-CTL ROHM Semiconductor
热门标签
ROHM
Aavid
Averlogic
开发板
SUSUMU
NXP
PCB
传感器
半导体
原厂授权品牌
更多授权品牌>>
资讯排行榜
  • 周排行榜
  • 月排行榜

相关百科
关于我们
AMEYA360微信服务号 AMEYA360微信服务号
AMEYA360商城(www.ameya360.com)上线于2011年，现 有超过3500家优质供应商，收录600万种产品型号数据，100 多万种元器件库存可供选购，产品覆盖MCU+存储器+电源芯 片+IGBT+MOS管+运放+射频蓝牙+传感器+电阻电容电感+ 连接器等多个领域,平台主营业务涵盖电子元器件现货销售、 BOM配单及提供产品配套资料等，为广大客户提供一站式购 销服务。