Murata：SCH16T-K20 High-Precision 6-Axis IMU for Robotics and Camera Systems
Trade news

Murata：SCH16T-K20 High-Precision 6-Axis IMU for Robotics and Camera Systems

　　Murata Manufacturing Co., Ltd. has announced the expansion of its SCH16T series of high-performance inertial measurement units (IMUs) with the introduction of the SCH16T-K20, targeting industrial, prosumer, and consumer markets worldwide. Designed for OEMs in robotics, drones, and camera systems, as well as IMU module manufacturers and system integrators requiring safety-critical IMUs, the SCH16T-K20 delivers market-leading precision, mechanical robustness, and reliability.　　In demanding inertial measurement applications such as dead-reckoning navigation as well as drone and camera stabilization, small measurement errors can accumulate over time leading to unpredictable measurement results. In these applications, key IMU parameters such as noise density, offset bias drift, and vibration rectification ultimately limit the end-application performance and achievable response speed. Murata improves all the key areas with the new SCH16T-K20, which features a brand-new MEMS accelerometer and improved gyroscope temperature calibration.　　The SCH16T-K20 is a 6 axis IMU with a typical gyroscope noise density of 0.0004 (°/s)/√Hz, gyroscope bias instability of 0.3 °/h, and accelerometer noise density as low as 33 µg/√Hz. Like all other SCH16T products, the SCH16T-K20 has a wide operating temperature range from -40 °C to +110 °C, a supply voltage of 3.0–3.6 V, and I/O voltage of 1.7–3.6 V, and a compact size of 0.46 × 0.53 × 0.11 inch (11.8 × 13.4 × 2.9 mm).　　The driver behind the SCH16T-K20 accelerometer performance improvement is the brand-new accelerometer MEMS based on Murata’s proven 3D MEMS technology. The new MEMS uses a double-differential measurement principle, familiar from current SCA3400 and legacy SCA103T series sensors. The double differential measurement enables SCH16T-K20’s market leading low noise density, as well as thermal and lifetime stability.　　The SCH16T-K20 also includes an enhanced version of the market-leading low-noise SCH16T gyroscope, now tuned specifically for the -40 °C to +85 °C temperature range to enable low offset bias shift across that range. All SCH16T series products are carefully validated with a test set based on AEC-Q100 operating temperature Grade 1 (-40 °C to +125 °C) standards*, ensuring reliable operation over a wide temperature window. The series sensors include market-leading self-diagnostic features, making them suitable for safety-critical applications. Murata’s unique MEMS stands out in the competitive IMU market for its exceptional mechanical resilience to shocks and vibration rectification. The series’ robust design and reliability contribute to longer device lifespans and reduced waste.　　The SCH16T-K20 becomes the highest-performing variant in the SCH16T lineup while maintaining pin-to-pin and software compatibility. This compatibility makes integration of different SCH16T variants easy for OEMs and module designers. Mass production of the SCH16T-K20 is scheduled to begin in the first half of 2026. Murata will continue developing sensor solutions aligned with evolving market demands, contributing to safer, more sustainable, and higher-performing technologies across industrial and consumer markets.
Key word：
Release time：2025-12-26 16:09 reading：354 Continue reading>>
Murata Launches World’s First Inner Cavity-Structure Ultra-Low-Loss LCP Flexible Substrate, Achieving Dk below 2.0, Contributing to 6G Realization
Trade news

Murata Launches World’s First Inner Cavity-Structure Ultra-Low-Loss LCP Flexible Substrate, Achieving Dk below 2.0, Contributing to 6G Realization

　　Murata Manufacturing Co., Ltd announces the World’s First LCP (liquid crystal polymer) flexible substrate with an Inner Cavity structure, ULTICIRC, and has already begun mass production*. Murata’s proprietary design incorporates an Inner Cavity within the substrate to achieve a dielectric constant (Dk) below 2.0, dramatically reducing transmission loss.Cross-Section Image　　With 6G expected to leverage the FR3 (Frequency Range 3) band—roughly 7–24 GHz—substrates with minimal transmission loss are essential to enable high-speed, high-capacity communications at high frequencies. At the same time, demand is growing for thin, space-saving flexible substrates that support free-form mechanical design to meet the ongoing miniaturization of smartphones and communication equipment. Murata has provided LCP flexible substrates with excellent high-frequency characteristics, featuring a proprietary high-performance resin that eliminates spring-back and an adhesive-free, one-shot press multilayer lamination process; building on this expertise for 6G readiness, Murata has developed and launched ULTICIRC. Conventional flexible substrates faced the challenge that making them thinner resulted in increased transmission loss, but this product incorporates an Inner Cavity structure within the substrate, achieving a dielectric constant (Dk) below 2.0, which is significantly lower than Murata's conventional products, enabling both thin profiles and ultra-low transmission loss simultaneously.　　Furthermore, thanks to an adhesive-free proprietary manufacturing method and the excellent barrier properties of LCP, the Inner Cavity structure maintains high moisture resistance.　　For inquiries regarding this product, please contact us.
Key word：
Release time：2025-12-18 16:00 reading：484 Continue reading>>
Murata develops integrated passive device for Semtech’s SX126X family
Trade news

Murata develops integrated passive device for Semtech’s SX126X family

　　Murata Manufacturing Co., Ltd. has developed a new integrated passive device (IPD) for use with the Semtech LoRa Connect™ SX126x family, which includes the SX1261, SX1262, and LLCC68 products. Using a proprietary low-temperature co-fired ceramic (LTCC) process, Murata has successfully replaced a series of discrete matching components of the SX1261/2 reference design with a single 2.00mm x 1.25mm size LTCC component.　　The IPD enables SX1261/2 radio designers to optimize for both size and performance using two dedicated parts. The LFB21892MDZ7F957 is optimized for US and European ISM bands, delivering the full output power for the US FCC bands. The LFB21892MDZ7F821 is optimized for Eurocentric designs that need to maximize the efficiency performance.　　“The Murata IPD offers the most efficient development path to realizing the full performance of the SX1261/2, featuring a miniaturized form factor that can significantly reduce board space,” says Arthur Kiang, Product Manager, RF Components, Murata. “The reduction in the number of matching components enables lower material costs and simplifies the design process, leading to shorter lead times. This integration also lowers the probability of soldering and manufacturing issues, as there is only one component to monitor in production.”　　“Semtech’s LoRa Connect™ SX126x family has become the trusted choice for LoRaWAN® networks and long-range IoT connectivity in applications from smart metering to industrial sensing,” says Carlo Tinella, product marketing director of wireless and sensing products at Semtech. “Murata’s IPD solution demonstrates the strength of our LoRa® ecosystem, helping radio engineers accelerate development while optimizing for both miniaturization and regulatory compliance. This partnership streamlines the path from design to deployment for millions of IoT devices being deployed globally.”　　Product samples are currently available, with mass production of the IPD commencing shortly.
Key word：
Release time：2025-11-28 17:33 reading：498 Continue reading>>
Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces
Trade news

Murata expands lineup of high cutoff frequency chip common mode choke coils in 0504-inch size for automotive high-speed differential interfaces

　　Murata Manufacturing Co., Ltd. (hereinafter ‘Murata’) has added a high cutoff frequency*1 product to its lineup of noise suppression components, the 0504-inch size (1.25 x1.0mm) chip common mode choke coils ‘‘DLM11C_HH2 Series’’ (hereinafter, ‘the product’), suitable for automotive high-speed differential interfaces such as LVDS*2, SerDes*3, USB, and HDMI. Murata has already started mass production of this product.　　*1High cutoff frequency: Reduces high-frequency noise.　　*2LVDS (Low Voltage Differential Signaling): An interface used for LCD panels.　　*3SerDes (Serializer/Deserializer): Circuits that convert between the serial and parallel signals in each direction.　　In recent years, the automotive market has seen multiple USB ports installed in each vehicle seat as interfaces for connecting smartphones and PCs, and data transfer speeds have increased from conventional USB 2.0 to Gbps-class USB 3.2. For these differential interfaces, common mode noise suppression is essential, and small common mode choke coils that support high-speed signals are required. In response, Murata developed this product using proprietary lamination technology to reduce high-frequency noise above 7.5 GHz in a compact 0504-inch size.　　Specifications　　*4AEC-Q200: One of the standards defined by the Automotive Electronics Council (AEC).
Key word：
Release time：2025-11-10 17:12 reading：542 Continue reading>>
Murata Launches Digital Output SMD Pyroelectric Infrared Sensor for Low Power Applications
Trade news

Murata Launches Digital Output SMD Pyroelectric Infrared Sensor for Low Power Applications

　　Murata Manufacturing Co., Ltd has launched a digital output SMD pyroelectric infrared sensor, IRS-D200ST00R1, with low power consumption and is already in mass production.　　In recent years, the use of IoT technology in smart homes and smart buildings has increased convenience, safety, and power saving within living spaces and facilities. Because of this, the demand for wireless communication units equipped with human detection functions capable of sensing movement in real time is also increasing to realize more efficient and comfortable environments. One of the key technologies to enable the motion detection function is a pyroelectric infrared sensor. Products which communicate wirelessly require long-term stable operation with reduced battery replacement or charging, thus creating a strong need for pyroelectric infrared sensors that can detect human movement while extending battery life. Additionally, to increase design flexibility inside these products, space-saving measures are essential, driving demand for compact infrared sensors., space-saving measures are essential, driving demand for compact infrared sensors.　　In response, we developed this product using proprietary pyroelectric ceramic technology to achieve low power consumption and a compact size. Even when continuously operating the human detection function, power consumption is kept low, and the sensor includes an interrupt function that activates the microcontroller only when a change is detected, contributing to extended battery life. Furthermore, the compact size enables space-saving, and the adoption of the digital I2C interface simplifies design during development.　　The main features of this product include contributing to overall system power reduction through low power consumption and interrupt functionality, space-saving due to its small and low-profile SMD package, ease of design enabled by built-in amplifier and ADC with digital output (I2C), reduction of false detections and stable operation thanks to high signal-to-noise ratio and EMI noise resistance, Also enabling process cost reduction through reflow compatibility.　　Key specifications are a dual element electrode size of 0.08 × 0.02 inch (2.0 × 0.5 mm), an overall size of 0.24 × 0.24 × 0.10 inch (6.0 × 6.0 × 2.6 mm), typical sensitivity of 19.5 mV, element height of 0.065 inch (1.65 mm), field of view of ±55° horizontal and ±42° vertical, supply voltage from 1.8 to 3.3 V, typical current consumption of 8 µA, and an I2C interface.*
Key word：
Release time：2025-09-15 14:09 reading：635 Continue reading>>
Murata Manufacturing Co., Ltd. expands lineup of isolated DC-DC converters for PoE IEEE802.3af
Trade news

Murata Manufacturing Co., Ltd. expands lineup of isolated DC-DC converters for PoE IEEE802.3af

　　Murata Manufacturing Co., Ltd. has expanded its lineup of isolated DC-DC converters for PoE*1 with the launch of an IEEE802.3af-compliant isolated DC-DC converter for PD*2 (hereinafter, ‘the product’). Murata has already started mass production of the product, and samples are available upon request.　　*1PoE: Power over Ethernet. A technology that enables power supply over LAN cables used to build networks.　　*2PD: Powered Device. A device that receives power in a PoE system.　　PoE technology enables power supply over LAN cables used to build networks, improving installation flexibility, and reducing costs. In recent years, network-enabled devices such as security cameras and biometric authentication equipment have increasingly adopted PoE technology. Against this backdrop, demand for compact power modules for PoE-compatible devices is growing. In particular, biometric authentication devices typically require around 10 W of power, making the IEEE802.3af standard, which supports up to 15 W, an ideal match.　　Accordingly, Murata has developed this product compliant with IEEE802.3af. The product’s compact, low-profile design (1.02×0.58×0.27 inches (26×14.8×6.8mm)) enhances layout flexibility on circuit boards. It is mainly suited for camera modules and biometric authentication devices that require space-saving and low-noise characteristics, and contributes to the miniaturization of other communication devices.　　Key features　　Isolated DC-DC converter module compliant with IEEE802.3af Class specifications　　Compact and low-profile (1.02×0.58×0.27 inches (26×14.8×6.8mm)) for high layout flexibility　　Wide operating temperature range (-40°C to +85°C) for versatile applications　　Applications　　IEEE802.3af-compliant devices including wireless access points, biometric authentication devices, security cameras, camera modules, IP phones, and audio speakers　　Specifications
Key word：
Release time：2025-09-08 15:11 reading：643 Continue reading>>
Murata Launches iSIM IoT Module with Built-In Global Connectivity from 1NCE
Trade news

Murata Launches iSIM IoT Module with Built-In Global Connectivity from 1NCE

　　Murata today introduced a new iSIM-compatible LPWA module, the Type 1SC, pre-integrated with out-of-the-box connectivity from 1NCE, one of the world’s fastest-growing IoT companies. The collaboration delivers simplified, scalable global connectivity, making it easier to launch and manage low-power IoT devices. Optimized for low-power, low-data applications, the solution comes bundled with 50 MB of data and optional top-ups, enabling rapid, cost-effective deployment for applications such as asset tracking, fleet management, and healthcare monitoring. Supporting both LTE-M and NB-IoT, the module offers broad compatibility across networks in 173 countries.　　By embedding 1NCE’s cloud-based connectivity directly into the module, Murata eliminates the need for separate SIM provisioning, streamlining the design and manufacturing process for compact, energy-efficient devices. The result is a faster, more reliable path to market. Additionally, with over 30 million devices managed across 23,000+ customers, its platform simplifies lifetime IoT connectivity – bringing seamless integration, global reach, and built-in scalability to the next generation of connected products.　　“Murata’s Type 1SC module represents our commitment to driving innovation in the IoT space,” said Hiro Hyogo, Senior Manager, Corporate Technology and Innovation at Murata Americas. “By having connectivity pre-installed on our modules, we’re reducing the complexities and costs associated with global IoT deployments while ensuring strong security and performance.”　　"IoT will be dominated by software players, which is why Murata chose and trusted in 1NCE," said Fabian Kochem, Head of Global Product Strategy at 1NCE. “The supply chain of IoT is bloated, but our two companies save our customers time and money.”
Key word：
Release time：2025-08-13 15:33 reading：786 Continue reading>>
Murata Unveils First High-Frequency XBAR Filter for Next-Gen Networks
Trade news

Murata Unveils First High-Frequency XBAR Filter for Next-Gen Networks

　　Murata Manufacturing Co., Ltd. has announced the mass production and commercial shipment of the world’s first*1 high-frequency filter using XBAR technology*2. Developed by combining Murata’s proprietary Surface Acoustic Wave (SAW) filter expertise with XBAR technology from Murata's subsidiary Resonant Inc., it enables the extraction of desired signals while achieving both low insertion loss and high attenuation. These features are critical for the latest wireless technologies, including 5G, Wi-Fi 6E, Wi-Fi 7, and emerging 6G technologies.　　The demand for reliable high-frequency communications continues to grow in response to the widespread deployment of 5G and the future development of 6G. Simultaneously, wireless local-area network (WLAN) standards such as Wi-Fi 6E and Wi-Fi 7 are expanding into higher frequency domains to accommodate ultra-fast data rates. Filters used in these applications must address key challenges, such as preventing out-of-band interference, maximizing system battery performance, and meeting strict space limitations. Traditional approaches using Low Temperature Co-Fired Ceramic (LTCC) or conventional Bulk Acoustic Wave (BAW) filters often fall short in these performance areas.　　Murata’s new XBAR-based filter addresses these limitations by achieving high attenuation performance while maintaining a wide bandwidth and low signal loss. The XBAR structure itself excites bulk acoustic waves using comb-shaped electrodes and a piezoelectric single-crystal thin film, enabling performance beyond the reach of conventional filter structures. It effectively removes high-frequency interference, even in bands above 3 GHz, allowing for clearer signal detection and better performance, contributing to high-speed, high-capacity, and high-quality wireless communication.　　Key performance parameters include a passband of 5150–7125 MHz, a typical insertion loss of 2.2 dB, and a typical return loss of 17 dB. Typical attenuation figures are 11 dB at 4800–5000 MHz, 28 dB at 3300–4800 MHz, 27 dB at 7737–8237 MHz, and 26 dB at 10300–14250 MHz.　　The new filter is targeted at devices with embedded wireless functionality, including smartphones, wearables, notebook PCs, and communication gateways, offering an optimal balance of performance and cost efficiency. Murata will continue to drive innovation in filter technologies to support the evolution of wireless communications, and expects this architecture to scale further, with future product generations capable of operating effectively in ultra-high frequency bands above 10GHz.　　Notes　　*1According to Murata research as of July 7, 2025.　　*2XBAR technology: Murata’s proprietary filter structure that excites bulk acoustic waves using comb-shaped electrodes and piezoelectric single-crystal thin films.
Key word：
Release time：2025-07-10 14:15 reading：720 Continue reading>>
Murata Begins World’s First Mass Production of 47µF Multilayer Ceramic Capacitor in 0402-inch Size
Trade news

Murata Begins World’s First Mass Production of 47µF Multilayer Ceramic Capacitor in 0402-inch Size

　　Murata Manufacturing Co., Ltd. has begun the world’s first mass production of the 0402-inch size (1.0 × 0.5 mm) multilayer ceramic capacitors (MLCC) with a capacitance of 47µF*. The new product line, available in two variants with different temperature characteristics, is designed to advance MLCC miniaturization and enhance customer system performance.　　In recent years, high-performance IT solutions, such as those used in AI servers and data centers, have seen rapid growth. Due to the often high component density demanded by these devices, optimized component placement within limited PCB areas is paramount. As a result, there is increasing demand for capacitors that offer both miniaturization and higher capacitance, along with high reliability under high-temperature conditions caused by heat generated from PCBs and integrated circuits (ICs).　　In response to these requirements, Murata has utilized its proprietary technologies in ceramic dielectric layers and internal electrode miniaturization to facilitate the world’s first mass production of this innovative 47µF product in the compact 0402-inch size. Compared to Murata’s conventional 0603-inch size product with the same capacitance, this new capacitor reduces mounting area by approximately 60%. Additionally, it delivers about 2.1 times the capacitance of Murata’s previous 22µF product in the same 0402-inch size.　　The MLCC is available in two variants – the X5R (EIA) GRM158R60E476ME01 with an operating temperature range of -55 to +85°C, and the X6S (EIA) GRM158C80E476ME01 with an operating temperature range of -55 to +105°C. The ability to operate in environments up to 105°C, makes the X6S variant well-suited for placement near ICs, thereby contributing to improved device performance and integration. Both devices feature a ±20% tolerance and rated voltage of 2.5Vdc.　　Murata is committed to advancing miniaturized capacitors with higher capacitance and improved high-temperature reliability to meet evolving market demands. These innovations not only support the ongoing miniaturization and functional enhancement of electronic devices but also contribute to lower material usage and increased production efficiency per unit, ultimately helping reduce power consumption at Murata’s factories and lessen environmental impact.　　For inquiries regarding this product, please contact us.　　Notes　　*Based on Murata research as of July 9, 2025.
Key word：
Release time：2025-07-10 14:13 reading：812 Continue reading>>
Murata Launches World’s First 10µF/50Vdc MLCC in 0805-inch Size for Automotive Applications
Trade news

Murata Launches World’s First 10µF/50Vdc MLCC in 0805-inch Size for Automotive Applications

　　Murata Manufacturing Co., Ltd. has announced the new GCM21BE71H106KE02 multilayer ceramic capacitor (MLCC) has entered mass production. The device is the world's first 0805-inch size (2.0 x 1.25 mm) MLCC to offer a capacitance of 10µF with a 50Vdc rating and is specifically engineered for automotive applications*. This cutting-edge product marks a significant advancement in MLCC design, delivering a smaller 0805-inch package while maintaining capacitance, voltage rating, and MLCC reliability.　　Advancements in advanced driver-assistance systems (ADAS) and autonomous driving (AD) technologies necessitate deploying an increased number of integrated circuits (ICs) within vehicle systems. This surge in ICs simultaneously leads to a greater demand for supporting high-capacitance passive components while imposing tighter spatial constraints – as a greater number of capacitors must be accommodated on increasingly crowded automotive printed circuit boards (PCBs).　　Designed for 12V automotive power lines, the GCM21BE71H106KE02 capacitor leverages Murata’s proprietary ceramic material and thinning technologies to help engineers to save PCB space and reduce the overall capacitor count, resulting in smaller, more efficient, and reliable automotive systems. As the first automotive-specific MLCC to achieve a 10µF capacitance with a 50Vdc rating in the compact 0805-inch size the GCM21BE71H106KE02 represents a significant advancement in capacitance efficiency. It offers roughly 2.1 times the capacitance of Murata’s previous 4.7µF/50Vdc product, despite sharing the same physical size. Furthermore, compared to the previous 10µF/50Vdc MLCC in the larger 1206-inch size (3.2 x 1.6 mm), the new MLCC occupies approximately 53% less space, providing substantial space savings for automotive applications.　　Murata will continue to pursue further miniaturization and increased capacitance of MLCCs, while expanding its product lineup to meet the evolving needs of the automotive market. These efforts will support the industry as they look to develop higher-performance and more multifunctional vehicles. In addition, by downsizing electronic components, Murata aims to reduce material usage and improve production efficiency per unit, helping to lower electricity consumption at its manufacturing sites and reduce overall environmental impact.
Key word：
Release time：2025-07-04 13:59 reading：806 Continue reading>>

Turn to

/ 5

Popular categories
Semiconductors Circuit Protection Electromechanical Embedded Solutions Connectors, Interconnects Sensors, Transducers Optoelectronics Development Kits Test and Measurement Power Fans, Thermal Management Boxes, Enclosures, Racks Cables, Wires Passive Components Others
  • Week of hot material
  • Material in short supply seckilling
model brand Quote
CDZVT2R20B ROHM Semiconductor
MC33074DR2G onsemi
BD71847AMWV-E2 ROHM Semiconductor
TL431ACLPR Texas Instruments
RB751G-40T2R ROHM Semiconductor
model brand To snap up
BP3621 ROHM Semiconductor
TPS63050YFFR Texas Instruments
IPZ40N04S5L4R8ATMA1 Infineon Technologies
STM32F429IGT6 STMicroelectronics
BU33JA2MNVX-CTL ROHM Semiconductor
ESR03EZPJ151 ROHM Semiconductor
Hot labels
ROHM
IC
Averlogic
Intel
Samsung
IoT
AI
Sensor
Chip
Original authorized brand
More Licensed Brands>>
Information leaderboard
  • Week of ranking
  • Month ranking

About us

Qr code of ameya360 official account

Identify TWO-DIMENSIONAL code, you can pay attention to

AMEYA360 mall (www.ameya360.com) was launched in 2011. Now there are more than 3,500 high-quality suppliers, including 6 million product model data, and more than 1 million component stocks for purchase. Products cover MCU+ memory + power chip +IGBT+MOS tube + op amp + RF Bluetooth + sensor + resistor capacitance inductor + connector and other fields. main business of platform covers spot sales of electronic components, BOM distribution and product supporting materials, providing one-stop purchasing and sales services for our customers.

Please enter the verification code in the image below：

verification code