| -Weight |
G.W 904g |
| -Form factor |
Board with 70-pin connector |
| -Dimensions(Intel Edison for Arduino) |
127.0 x 72.0 x 12.0 mm |
| -Connector |
Hirose DF40 Series (1.5mm, 2.0mm, or 3.0mm stack height) |
| -Memory type |
DDR3, Nand Flash |
| -ECC Memory supported |
NO |
| -UART |
2 Controllers |
| -SPI |
1 Controller with 2 chip select |
| -GPIO |
Additional 12 (with 4 capable of PWM) |
| -Clock Output |
32 KHz, 19.2 MHz |
| -RAM |
1 GB LPDDR3 POP memory |
| -WiFi |
Broadcom 43340 802.11 a/b/g/n, Dual-band (2.4 and 5 GHz), On board antenna or external antenna SKU configurations |
| -Input |
3.3V – 4.5V |
| -Power |
Standby (No radios): 13mW, Standby (BT 4.0): 21.5mW, Standby (WiFi): 35 mW |
| -Arduino IDE, Eclipse supporting |
C, C++ & Python, Intel XDK supporting: Node.JS & HTML5 |
| -Development Environments |
MCU SDK and IDE |
| -Battery |
Exclude |
| -Dimensions(Intel Edison module) |
32.5 x 25.0 x 3.9 mm |
| -Operating temperature |
0 to 40 degC |
| -Max Memory size |
4GB |
| -Physical add. Ext. |
32-bit |
| -SD Card |
1 interface |
| -I2C |
2 Controllers |
| -I2S |
1 Controller |
| -USB2.0 |
1 OTG Controller |
| -SoC |
22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz |
| -Flash Storage |
4 GB eMMC |
| -Bluetooth |
BT 4.0 |
| -Output |
100ma @3.3V and 100ma @ 1.8V |
| -CPU OS |
Yocto Linux v1.6 |
| -MCU OS |
RTOS |
| -Battery |
Exclude |
| -Dimensions(Intel Edison module) |
32.5 x 25.0 x 3.9 mm |
| -Operating temperature |
0 to 40 degC |
| -Max Memory size |
4GB |
| -Physical add. Ext. |
32-bit |
| -SD Card |
1 interface |
| -I2C |
2 Controllers |
| -I2S |
1 Controller |
| -USB2.0 |
1 OTG Controller |
| -SoC |
22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz |
| -Flash Storage |
4 GB eMMC |
| -Bluetooth |
BT 4.0 |
| -Output |
100ma @3.3V and 100ma @ 1.8V |
| -CPU OS |
Yocto Linux v1.6 |
| -MCU OS |
RTOS |
| -Weight |
G.W 904g |
| -Form factor |
Board with 70-pin connector |
| -Dimensions(Intel Edison for Arduino) |
127.0 x 72.0 x 12.0 mm |
| -Connector |
Hirose DF40 Series (1.5mm, 2.0mm, or 3.0mm stack height) |
| -Memory type |
DDR3, Nand Flash |
| -ECC Memory supported |
NO |
| -UART |
2 Controllers |
| -SPI |
1 Controller with 2 chip select |
| -GPIO |
Additional 12 (with 4 capable of PWM) |
| -Clock Output |
32 KHz, 19.2 MHz |
| -RAM |
1 GB LPDDR3 POP memory |
| -WiFi |
Broadcom 43340 802.11 a/b/g/n, Dual-band (2.4 and 5 GHz), On board antenna or external antenna SKU configurations |
| -Input |
3.3V – 4.5V |
| -Power |
Standby (No radios): 13mW, Standby (BT 4.0): 21.5mW, Standby (WiFi): 35 mW |
| -Arduino IDE, Eclipse supporting |
C, C++ & Python, Intel XDK supporting: Node.JS & HTML5 |
| -Development Environments |
MCU SDK and IDE |
